Versions Compared

Old Version 20

changes.mady.by.user Alex Andbæk Nielsen

Saved on

compared with

New Version Current

changes.mady.by.user malthe lange

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

  • A ClinicalImpresssion:

    • .finding for each .component in the observation (e.g. systolic and diastolic blood pressure) or a single finding if the observation does not contain components.

      • Each finding for observation will have one of the following alert levels:

        • http://snomed.info/sct, 442082004, fund ved måling inden for referenceinterval (green)

        • http://snomed.info/sct, 442096005, fund ved måling uden for referenceinterval (red, yellow)

      • If the finding is for a component, then it will contain an observation code identifying the component (e.g. systolic blood pressure). With release 13 there will always be an observation code within the finding containing alert levelWith Release 13 a new finding entry will be added

    • .

      The

      finding

      will contain an

      for the overall assessment which is either green, yellow or red based on the worst severity from components or a single observation

      . (http

      , see green, yellow and red in .https://ehealth.sundhed.dk/

      cs

      fhir/ValueSet-ehealth-clinicalimpression-finding-codes

      )

      .html .

    • A Task related to the ClinicalImpression with priority based on the highest alert level found:

      • asap if any values are found in “red alert” reference ranges

      • urgent if any values are found in “yellow alert” reference ranges (and no “red alert” found)

      • routine if no red or yellow alerts are found

...

The rule processes absolute reference ranges only, that is, Observation.referenceRange.type where the Coding has:

  • system: urn:oid:1.2.208.184.100.1

  • code: RAL or GAL, for red alarm absolute reference range and yellow alarm absolute reference range, respectively.

...

The rule accepts observation values and reference ranges without units. However if both have a unit specified, they must match.

Error handling :

...

Situation

...

for different situations which result in the rule setting up instructions

...

for creation of one or two Task:

Situation

Generic Task

Possible Specific Task (Stating what was wrong)

No absolute reference range found

Task (Stating that measurement needs manual assessment):

  • .category with .code = MeasurementForAssessment, .system = http://ehealth.sundhed.dk/cs/task-category, .display = Need assessment of measurement

  • .description = Måling til vurdering

  • .restrictionCategory with .code = measurement-monitoring, system = http://ehealth.sundhed.dk/cs/restriction-category, .display = Monitoring of measurement(s)

  • .priority = routine

  • .focus = reference to measurement being processed, for instance Observation, QuestionnaireResponse or Media

No additional task.

Unit mismatch between reference range and observation value

Task (Stating that measurement needs manual assessment as auto processing failed):

  • .category with .code = MeasurementForAssessmentFailureInAutoProcessing, .system = http://ehealth.sundhed.dk/cs/task-category, .display = Measurement Assessment failure during automated processing

  • .description = Vurdering af måling er fejlet under automatisk behandling

  • .restrictionCategory with .code = measurement-monitoring, system = http://ehealth.sundhed.dk/cs/restriction-category, .display = Monitoring of measurement(s)

  • .priority = routine

  • .focus = reference to measurement being processed, for instance Observation, QuestionnaireResponse or Media

Task:

  • .category with .code = RefRangeFixingNeeded, .system = http://ehealth.sundhed.dk/cs/task-category, .display = Missing in force reference base required for automatic processing

  • .description = Automatiseret behandling af måledata fejlede. Grænseværdi krævet af automatiseret behandling skal udbedres

  • .restrictionCategory with .code = measurement-monitoring, system = http://ehealth.sundhed.dk/cs/restriction-category, .display = Monitoring of measurement(s)

  • .priority = routine

  • .focus = reference to ServiceRequest referenced by the measurement being processed

Missing observation value

Task (Stating that measurement needs manual assessment as auto processing failed):

  • .category with .code = MeasurementForAssessmentFailureInAutoProcessing, .system = http://ehealth.sundhed.dk/cs/task-category, .display = Measurement Assessment failure during automated processing

  • .description = Vurdering af måling er fejlet under automatisk behandling

  • .restrictionCategory with .code = measurement-monitoring, system = http://ehealth.sundhed.dk/cs/restriction-category, .display = Monitoring of measurement(s)

  • .priority = routine

  • .focus = reference to measurement being processed, for instance Observation, QuestionnaireResponse or Media

Task:

  • .category with .code = LibraryUseMismatchFixingNeeded, .system = http://ehealth.sundhed.dk/cs/task-category, .display = Input and rule did not match

  • .description = Automatiseret behandling af måledata fejlede. Aktivitet i plan og tilknyttet regel passer ikke sammen. Det bør overvejes om borger skal have ny plan.

  • .restrictionCategory with .code = measurement-monitoring, system = http://ehealth.sundhed.dk/cs/restriction-category, .display = Monitoring of measurement(s)

  • .priority = routine

  • .focus = reference to ServiceRequest referenced by the measurement being processed

Assessment of Relative Reference Ranges Library and Rule

...

Info

Example relative reference range as -5 percentage point with reference base 90% for oxygen saturation measurement

The oxygen saturation measurement unit is expressed as percent (system=http://unitsofmeasure.org, code=%), the reference base likewise and in this case with a value of 90.

A red alarm relative reference range given as -5 percentage point would be given by a SimpleQuantity for the reference range’s low element with:

  • value=-5

  • unit=percentage point

  • system=http://ehealth.sundhed.dk/cs/ehealth-unit-code

  • code=percentagepoint

Thus, the rule would treat an Observation with value 85% as a red alarm case for this relative reference range and current choice of reference base with value 90%.

The rule handles situations as follows:

...

Situation

...

different situations which result in the rule setting up instructions

...

for creation of one or two Task:

Situation

Generic Task

Possible Specific Task (Stating what was wrong)

Neither reference base nor relative reference range(s) found

Task:

  • .category with .code = MeasurementForAssessmentNotTriaged, .system = http://ehealth.sundhed.dk/cs/task-category, .display = Need assessment of measurement where triage was not performed during automated processing

  • .description = Måling til vurdering, hvor triagering ikke er udført af automatiseret behandling

  • .restrictionCategory with .code = measurement-monitoring, system = http://ehealth.sundhed.dk/cs/restriction-category, .display = Monitoring of measurement(s)

  • .priority = routine

  • .focus = reference to measurement being processed, for instance Observation, QuestionnaireResponse or Media

No additional task.

No reference base found

Task:

  • .category with .code = RefBaseNeeded, .system = http://ehealth.sundhed.dk/cs/task-category, .display = Missing in force reference base required for automatic processing

  • .description = Mangler gældende referenceværdi påkrævet for automatisk behandling

  • .restrictionCategory with .code = measurement-monitoring, system = http://ehealth.sundhed.dk/cs/restriction-category, .display = Monitoring of measurement(s)

  • .priority = routine

  • .focus = reference to ServiceRequest referenced by the measurement being processed

No relative reference range found

Task:

  • .category with .code = RefRangeNeeded, .system = http://ehealth.sundhed.dk/cs/task-category, .display = Missing reference range required for automated processing

  • .description = Mangler grænseværdi påkrævet for automatisk behandling

  • .restrictionCategory with .code = measurement-monitoring, system = http://ehealth.sundhed.dk/cs/restriction-category, .display = Monitoring of measurement(s)

  • .priority = routine

  • .focus = reference to ServiceRequest referenced by the measurement being processed

Library for Assessment of Questionnaire Response

...

During processing of the rule, each answer significance defined in the Questionnaire (see https://docs.ehealth.sundhed.dk/latest-released/igfhir/StructureDefinition-ehealth-questionnaire.html#answer-significance ) on questions and their linked answers in the QuestionnaireResponse are traversed and checked whether the condition(s) of the answer significance is met by the linked answer. When this is the case, a finding basis is added to internal bookkeeping. Ultimately, the list of finding basis determines the created ClinicalImpression finding and the priority of the created task:

...

  • A ClinicalImpresssion:

    • .finding as follows:

      • If the triggered red set is not empty, a finding.item with a Coding:

        • system = http://ehealth.sundhed.dk/cs/clinicalimpression-finding-codes

        • code = red-question-answer

        • display = Rød spørgsmål/svar-kombination fundet i spørgeskemabesvarelseWith release 13 Red overall assessment

      • If the triggered yellow set is not empty, a finding.item with a Coding:

        • system = http://ehealth.sundhed.dk/cs/clinicalimpression-finding-codes

        • code =

          red

          yellow

        • display =

          Red overall assessment

        If the triggered yellow set is not empty, a finding.item with a Coding:

        • system = http://ehealth.sundhed.dk/cs/clinicalimpression-finding-codes

        • code = yellow-question-answer

        • display = Gul spørgsmål/svar-kombination fundet i spørgeskemabesvarelse

        • With release 13

        • system = http://ehealth.sundhed.dk/cs/clinicalimpression-finding-codes

          • code =

          yellow

          display = yellow

          overall assessment

      • If both triggered sets are empty, a finding.item with a Coding:

      • system = http://ehealth.sundhed.dk/cs/clinicalimpression-finding-codes

      • code = green-question-answer

      • display = Grøn spørgsmål/svar-kombination fundet i spørgeskemabesvarelse

        • With release 13

        • system = http://ehealth.sundhed.dk/cs/clinicalimpression-finding-codes

        • code = green

        • display = Green overall assessment

      • If the Questionnaire does contain answer significance definitions but none have been triggered, a finding.item with a Coding:

        • system = http://ehealth.sundhed.dk/cs/clinicalimpression-finding-codes

        • code = no-effective-answer-significance

        • display = Ingen triageringsindikator for spørgsmål/svar-kombination har fundet anvendelse

      • If the Questionnaire does not contain answer significance definitions, a finding.item with a Coding:

        • system = http://ehealth.sundhed.dk/cs/clinicalimpression-finding-codes

        • code = no-answer-significance-defined

        • display = Ingen triageringsindikator defineret i spørgeskemaet

    • list of .ehealth-questionnaireresponse-finding-basis for each basis for the overall ClinicalImpression as follows:

      • linkId set to linkId for the Questionnaire item/QuestionnaireResponse item pair which triggered the finding basis

      • value set to value of the answer which triggered the finding basis

      • finding set to green-question-answer, yellow-question-answer or red-question-answer from http://ehealth.sundhed.dk/vs/clinicalimpression-finding-codes based on signifiance on triggered ehealth-questionnaire-answerSignificance

      • ehealth-questionnaire-answerSignificance is the triggered answerSignificance which is gathered from Questionnaire item

  • A Task related to the ClinicalImpression with:

    • priority set to the priority value determined above.

...

...

Output will be a code from the http://hl7.org/fhir/v3/ObservationInterpretation CodeSystem:

Output Coding

Evaluation

code=IND, system=http://hl7.org/fhir/v3/ObservationInterpretation, display=Indeterminate

The referenced ServiceRequest does not contain ehealth-reuseCriteria specifying a max age of the height Observation. This max age, although stated for reuse, is used for the height Observation use in an BMI calculation also.

code=N, system=http://hl7.org/fhir/v3/ObservationInterpretation, display=Normal

The height Observation has not exceeded the max age specified in ehealth-reuseCriteria in the referenced ServiceRequest.

code=L, system=http://hl7.org/fhir/v3/ObservationInterpretation, display=Low

The height Observation has exceeded the max age specified in ehealth-reuseCriteria in the referenced ServiceRequest.

Library for Calculating Body Mass Index

...

It is not necessary to provide the ServiceRequest as input. The Libary$evaluate operation will retrieve it by resolving the basedOn reference in the weight Observation.

...