...
When a client starts an OIDC Authorization Code Flow for a municipal user, it uses SEB and KOMBIT Context Handler and goes through the following federation process.
...
The KOMBIT Context Handler created a SAML AuthnResponse based on registrations stored in the KOMBIT user administration system KOMBIT STS Administration (STS Admin or DK Admin for short).
The eHealth Infrastructure-hosted SAML Proxy- This service does tasks like substituting and translating KOMBIT-flavor SAML Attributes to ensure uniform OIOSAML OIO-BPP Attributes are provided to SEB. It also enhances OIOSAML Attributes by adding the employee's CPR number, obtained from the KOMBIT FK Organisation system.
Sundhedsvæsenets Elektroniske Brugerstyring (SEB) - This is the shared user administration platform for the Danish healthcare sector.
The eHealth Authorization Service (KeyCloak) - When the KOMBIT NSIS Context Handler can connect directly with SEB and , the SAML-proxy is removed from the flow. The KeyCloak service shall then modify and adapt KOMBIT-style SAML Attributes to ensure they match the uniform OIOSAML OIO-BPP Attributes used.
...
KOMBIT
...
KOMBIT Terms and Concepts
Note |
---|
The English terms used in the following do not constitute official, KOMBIT translations of the Danish terms used throughout KOMBIT documentation and systems. The Danish terms stem from section 3 in Brugervejledning til Administrationsmodulerne for leverandører. |
The following terms are used in registrations in “Fælleskommunalt Administrationsmodul” (KOMBIT STS Admin):
Usersystem
Name
EntityId
Syntax validation
DEVTEST
Careteam
Term | Description |
---|---|
User -facing system (Danish: Brugervendt system) | An IT system that provides an access-controlled user interface, A user -facing system registered in the KOMBIT STS admin enables it to use KOMBIT systems for access control of end-users. For the KOMBIT external test environment the following eHealth environments are registered as user-facing systems, and thereby use KOMBIT systems for access control:
Similar registrations are made in the KOMBIT STS Admin in the KOMBIT production environment, only here the sole SAML Proxy is in eHealth Infrastructure production environment (PROD). |
User system role (Danish: Brugersystemrolle) | Grouping of rights or permissions that define access and access restrictions to a specific user-facing system
|
Data constraint (Danish: Dataafgrænsning) | Restriction of a “user system role”, which narrows the system role's field of action Concerning eHealth Infrastructure, these are: System-specific data constraint
Cross-cutting (data constraint
|
Job function role (Danish: Jobfunktionsrolle) | Grouping of user system roles for an authority (e.g. municipality) used by the authority to assign access to the user. Each municipality shall maintain a set in KOMBIT STS Admin. Concerning eHealth Infrastructure, these comprise:
|
Data constraints (Danish: “data afgrænsninger”)
The data constraints are which narrow the user system role. In eHealth Infrastructure, there are two data constraints in use:
CareTeam - a system-specific data constraint identifying a CareTeam. The optional for some user system roles, required for others (see below)
Organisation - Cross-cutting (data constraint) identifying Organisation from KOMBIT FK Organisation.
User system role (Danish: Brugersystemrolle) | Grouping of rights or permissions that define access and access restrictions to a specific user-facing system
|
Data constraint (Danish: Dataafgrænsning) | Restriction of a “user system role”, which narrows the system role's field of action |
Job function role (Danish: Jobfunktionsrolle) | Grouping of user system roles for an authority (e.g. municipality) used by the authority to assign access to the user. Each municipality shall maintain a set in KOMBIT STS Admin. Concerning eHealth Infrastructure, the job function role should comprise:
|
Registrations Required in Municipal KOMBIT Systems
eHealth Infrastructure as User-systems
The eHealth test environments use KOMBIT Context Handler for access control and therefore are registered as user-facing systems in the FK Administration system
The following eHealth environments are registered as user-facing systems in the KOMBIT external test:
Usersystem in FK Administration | System | |||
---|---|---|---|---|
1 | FUT - SAML Proxy (devtest) | FUT saml-proxy for the internal Systematic Test Environment. | ||
2 | FUT - SAML Proxy (inttest) | FUT saml-proxy for the eHealth Internal Test Environment | ||
3 | FUT - SAML Proxy (exttest) | FUT saml-proxy for the eHealth External Test environment (exttest) and external development environment (devenvcgi). | ||
4 | FUT - SAML Proxy (test002) | FUT saml-proxy for the eHealth Education environment (TEST002) | ||
5 | FUT - SAML Proxy (preprod) | FUT saml-proxy for the eHealth pre-production environment | ||
6 | “T-SEB”
| T-SEB for all eHealth test (incl. pre-prod) environments. |
FUT-S has created similar registrations in the KOMBIT FK Admininistratino in the KOMBIT production environment. This only has the SAML Proxy for the eHealth Infrastructure production environment (PROD).
Data constraints (Danish: “data afgrænsninger”)
The data constraints narrow the user system role. In eHealth Infrastructure, there are two data constraints in use:
CareTeam - a system-specific data constraint identifying a CareTeam. The optional for some user system roles, required for others (see below)
Organisation—This is a cross-cutting (data constraint) identifying Organisation from KOMBIT FK Organisation. This data constraint is defined and maintained outside eHealth.
The following screenshot shows the “Fælleskommunalt Administrationsmodul” user interface for creating data constraints and mandatory fields.
...
User-facing system | Data Constraint Name | EntityId (domain + “/constraint/”+ filter + version) | Syntax validation | |
---|---|---|---|---|
1 | DEVTEST | Careteam |
| ([0-9a-f]{8}-[0-9a-f]{4}-4[0-9a-f]{3}-[0-9a-f]{4}-[0-9a-f]{12}) |
INTTEST
+(,\s*[0-9a-f]{8}-[0-9a-f]{4}-4[0-9a-f]{3}-[0-9a-f]{4}-[0-9a-f]{12})* | ||||
2 | INTTEST | Careteam |
| ([0-9a-f]{8}-[0-9a-f]{4}-4[0-9a-f]{3}-[0-9a-f]{4}-[0-9a-f]{12})+(,\s*[0-9a-f]{8}-[0-9a-f]{4}-4[0-9a-f]{3}-[0-9a-f]{4}-[0-9a-f]{12})* |
3 | EXTTEST, DEVENVCGI | Careteam |
| ([0-9a-f]{8}-[0-9a-f]{4}-4[0-9a-f]{3}-[0-9a-f]{4}-[0-9a-f]{12})+(,\s*[0-9a-f]{8}-[0-9a-f]{4}-4[0-9a-f]{3}-[0-9a-f]{4}-[0-9a-f]{12})* |
4 | TEST002 | Careteam |
| ([0-9a-f]{8}-[0-9a-f]{4}-4[0-9a-f]{3}-[0-9a-f]{4}-[0-9a-f]{12})+(,\s*[0-9a-f]{8}-[0-9a-f]{4}-4[0-9a-f]{3}-[0-9a-f]{4}-[0-9a-f]{12})* |
5 | PREPROD | Careteam |
| ([0-9a-f]{8}-[0-9a-f]{4}-4[0-9a-f]{3}-[0-9a-f]{4}-[0-9a-f]{12})+(,\s*[0-9a-f]{8}-[0-9a-f]{4}-4[0-9a-f]{3}-[0-9a-f]{4}-[0-9a-f]{12})* |
STS Admin User system roles for the eHealth Infrastructure
User system roles for the eHealth Infrastructure registered in KOMBIT STS Admin:
...
shall have an EntityId on the form: <namespace>
appended with <KOMBIT user system role for the eHealth Infrastructure>
(see below).
...
6 | “T-SEB”
| Careteam
|
|
...
|
...
The <namespace>
shall reflect the eHealth Infrastructure environment for registration in the KOMBIT STS Admin. The <namespace>
shall be one of the following:
...
eHealth Infrastructure Environment
...
<namespace>
...
INTTEST
...
saml-proxy.inttest.ehealth.sundhed.dk
...
EXTTEST, DEVENVCGI
...
saml-proxy.exttest.ehealth.sundhed.dk
...
TEST002
...
saml-proxy.test002.ehealth.sundhed.dk
...
PREPROD
...
saml-proxy.preprod.ehealth.sundhed.dk
...
PROD
...
ehealth.sundhed.dk
Note |
---|
In case of change in what eHealth Infrastructure environments shall support municipal federation of authentication and authorization, the above list needs to be updated. In addition, such a change needs to be implemented in the mapping performed by the SAML Proxy. |
<KOMBIT user system role for the eHealth Infrastructure
> shall be one from the list below:
The table shows the KOMBIT user system role, the corresponding OIO BPP roles, and what data constraints are possible and which are mandatory.
KOMBIT user system roles for the eHealth Infrastructure
Data constraints (EXTTEST)
STS Organisationsenhed
Data constraints (Prod)
Organisation
/roles/usersystemrole/order_placer/1
urn:dk:sundhed:ehealth:role:order_placer
Mandatory
Mandatory
X
/roles/usersystemrole/citizen_enroller/1
urn:dk:sundhed:ehealth:role:citizen_enroller
Mandatory
Mandatory
Mandatory
x
x
/roles/usersystemrole/careteam_administrator/1
urn:dk:sundhed:ehealth:role:careteam_administrator
Mandatory
Mandatory
x
/roles/usersystemrole/incident_reporter/1
urn:dk:sundhed:eHealth:role:incident_reporter
Mandatory
Mandatory
Mandatory
x
x
/roles/usersystemrole/clinical_viewer/1
urn:dk:sundhed:eHealth:role:clinical_viewer
Mandatory
Mandatory
Mandatory
x
/roles/usersystemrole/clinical_supporter/1
urn:dk:sundhed:eHealth:role:clinical_supporter
Mandatory
Mandatory
Mandatory
x
/roles/usersystemrole/monitoring_assistor/1
urn:dk:sundhed:eHealth:role:monitoring_assistor
Mandatory
Mandatory
Mandatory
x
x
| ([0-9a-f]{8}-[0-9a-f]{4}-4[0-9a-f]{3}-[0-9a-f]{4}-[0-9a-f]{12})+(,\s*[0-9a-f]{8}-[0-9a-f]{4}-4[0-9a-f]{3}-[0-9a-f]{4}-[0-9a-f]{12})* |
KOMBIT User system roles for the eHealth Infrastructure
The following screenshot shows the “Fælleskommunalt Administrationsmodul” user interface for creating user system roles and mandatory fields.
...
User system roles for the eHealth Infrastructure registered in KOMBIT STS Admin:
shall have an EntityId on the form:
<Domain>
appended with<KOMBIT role name for the eHealth Infrastructure>
and<version>
(see below).can have (and should have) a Danish name, the Danish designationhttps://ehealth.sundhed.dk/fhir/CodeSystem-ehealth-oio-bpp-roles.html for the corresponding eHealth Infrastructure OIO BPP system role.
<Domain>
shall reflect the eHealth Infrastructure environment for registration in the KOMBIT STS Admin. The<Domain>
shall be one of the following:
eHealth Infrastructure Environment | Domain | |||||
---|---|---|---|---|---|---|
1 | INTTEST |
| ||||
2 | EXTTEST, DEVENVCGI |
| ||||
3 | TEST002 |
| ||||
4 | PREPROD |
| ||||
5 | PROD |
| ||||
6 | “T-SEB”
|
|
Note |
---|
In case of change in what eHealth Infrastructure environments shall support municipal federation of authentication and authorization, the above list needs to be updated. In addition, such a change needs to be implemented in the mapping performed by the SAML Proxy. |
Mapping between KOMBIT user system role, the corresponding OIO BPP roles
The KOMBIT user system role has a different format than the eHealth Infrastructure OIO BPP system roles. The following table shows the KOMBIT user system role and the corresponding OIO BPP roles.
KOMBIT user system roles for the eHealth Infrastructure | |
---|---|
|
|
|
Mandatory
Mandatory
Mandatory
x
|
|
|
|
|
Mandatory
Mandatory
x
x
|
|
|
|
|
|
Mandatory
Mandatory
|
|
|
|
Mandatory
Mandatory
x
|
|
|
|
|
|
Mandatory
Mandatory
x
| |
|
|
|
Mandatory
Mandatory
x
x
|
|
|
|
|
|
|
|
|
|
|
Mandatory
x
|
|
|
|
|
|
Mandatory
x
x
| |
|
|
|
|
|
|
|
|
|
Mandatory
x
x
...
| |
|
|
|
|
|
|
|
|
|
|
|
|
eHealth Infrastructure User system roles for FUT Proxy (exttest)
<KOMBIT role name for the eHealth Infrastructure
> shall be one from the list below:
The table shows the KOMBIT user system role and the possible data constraints, which are mandatory for “FUT Proxy (exttest)”.
KOMBIT user system roles for the eHealth Infrastructure | Data constraints (EXTTEST) | |
---|---|---|
STS Organisationsenhed | Careteam | |
| Mandatory | |
| Mandatory | Mandatory |
| Mandatory | |
| Mandatory | Mandatory |
| Mandatory | Mandatory |
| Mandatory | Mandatory |
| Mandatory | Mandatory |
| Mandatory | Mandatory |
| Mandatory | |
| Mandatory | |
| Mandatory | Mandatory |
| Mandatory | |
| Mandatory | Mandatory |
| Mandatory | |
| Mandatory | |
| Mandatory | |
| Mandatory |
eHealth Infrastructure User system roles for FUT Proxy (prod)
The table shows the KOMBIT user system role and the possible data constraints which are mandatory for “FUT Proxy (prod)”.
KOMBIT user system roles for the eHealth Infrastructure | Data constraints | |||
---|---|---|---|---|
Organisation | SOR Organisationsenhed | SSL Organisationsenhed | Careteam | |
| Mandatory | Optional | ||
| Mandatory | Optional | Optional | |
| Mandatory | Optional | ||
| Mandatory | Optional | Optional | |
| Mandatory | Optional | ||
| Mandatory | Optional | ||
| Mandatory | Optional | Optional | |
| Mandatory | Optional | Optional | |
| Mandatory | Optional | Optional | |
| Mandatory | Optional | ||
| Optional | Optional | ||
| Mandatory | Optional | ||
| Optional | Optional | ||
| ||||
| Optional | Optional | ||
| Optional | Optional | ||
| Optional | Optional |
eHealth Infrastructure User system roles for T-SEB (consolidated)
The table shows the KOMBIT user system role, the corresponding OIO BPP roles, and what data constraints are possible and which are mandatory for “T-SEB”.
Note |
---|
When the SEB is used as a user-facing system, it may not contain underscore, and names may be prepended “eHealth” or “FUT”. |
KOMBIT user system roles for the eHealth Infrastructure
| Data constraints | |||
---|---|---|---|---|
Organisation
| Careteam | |||
| Mandatory | Mandatory | ||
| Mandatory | Mandatory | ||
| Mandatory | Optional | ||
| Mandatory | Optional | ||
| Mandatory | Mandatory | ||
| Mandatory | Optional | ||
| Mandatory | Mandatory | ||
| Mandatory | Mandatory | ||
| Mandatory | Optional | ||
| Mandatory | Optional | ||
| Mandatory | Optional | ||
| Mandatory | Optional | ||
| Mandatory | Optional | ||
| Mandatory | Optional | ||
| Mandatory | Optional | ||
| Mandatory | Optional | ||
| Mandatory | Optional |
Note |
---|
If the OIO BPP system roles system listed above deviate from the list described inhttps://ehealth-dk.atlassian.net/wiki/spaces/EDTW/pages/291176482/Tokens+Roles+and+RBAC+ABAC#Privilege-Roles, the above list needs to be updated. In addition, such a change needs to be implemented in the https://ehealth-dk.atlassian.net/wiki/spaces/EDTW/pages/2172125189/SAML+Proxy#Mapning-af-privilegier-og-constraintsperformed by the SAML Proxy. |
Getting municipal employee CPR
To allow regional and municipal employees to access national healthcare solutions from the FUT Infrastructure their CPR information is required. The Infrastructure receive CPR for regional employees directly from SEB, however, for municipal employees, CPR must be obtained from Kombit FK Org. This is done through the internal OS2Sync service* running on the Infrastructure. OS2Sync uses BrugerService and PersonService version 6 of Kombit FK Org Version 3.2.
*The image used on the FUT Infrastructure can be found on dockerhub and the source code on GitHub OS2Sync.