Page Comparison

...

Over the lifecycle of a CarePlan it’s , its status might change. Adjustment of CarePlan.status can be performed through CarePlan Update by:

...

...

Over the lifecycle of a CarePlan, the set of CareTeam involved might change. Adjustment of CareTeam involved can be performed in a number of several ways:

• Through CarePlan Update

  • Setting the CarePlan.careTeam

  • Setting the scheduled team changes in CarePlan.ehealth-teamschedule

  • Through CarePlan$update-care-teams

• Through EpisodeOfCare$update-care-teams (which also updates all CarePlan related to the EpisodeOfCare)

...

• ServiceRequest.occurrence[x] which must contain a measurement regime with a defined starting date/time.

• ServiceRequest.status which must be set according to the situation, see below.

An employee should possibly consider (typically one-off) adjustment of:

• Sharing policy in ServiceRequest.ehealth-sharingPolicy

• Sharing Approval Policy in ServiceRequest.ehealth-sharingApprovalPolicy

• Reuse criteria in ServiceRequest.ehealth-reuseCriteria

...

• The CareTeam(s) involved in daily monitoring etc. in ServiceRequest.careTeam

• Measurement ranges in ServiceRequest.ehealth-referenceRange

• Any reference value needed for triaging based on relative measurement range(s)

Setting the ServiceRequest

...

Sharing Approval Policy

The measurement regime Sharing Approval Policy of a ServiceRequest expresses when the activity described in the ServiceRequest is supposed to take place. The measurement regime whether the approval for registering documents is automated or done manually. It is defined in ServiceRequest.occurrence[x] by use of one of the alternatives:

...

ehealth-sharingApprovalPolicy.

This extension is Optional. If set, it can have one of two values:

• automatic - used when the activity should be performed at specific point in time, that is date and time.occurrencePeriod approval of registering documents is wanted to be done automatically.

• manual - used when the activity approval of registering documents should be performed once during a period of time. The period may be open, that is, without period end being specified.

• occurrenceTiming - used when the activity should be performed in recurring manner, for instance each week or at specific days or time of day.

The initial measurement regime in ServiceRequest.occurrence[x] is a copy from the PlanDefinition/ActivityDefintion made at time of creation (see https://ehealth-dk.atlassian.net/wiki/spaces/EDTW/pages/1661141027/Creating+Care+Plans#Applying-the-PlanDefinition) and typically, it contains no starting date/time.

A starting date/time is required when ServiceRequest.status is all but draft, revoked, or entered-in-error. The starting date/time can be provided as:

• ServiceRequest.occurrenceDateTime - here the starting date/time is also ending date/time.

• ServiceRequest.occurrencePeriod.start

• ServiceRequest.occurrenceTiming.repeat.boundsPeriod.startdone manually.

The initial ServiceRequest.ehealth-sharingApprovalPolicy is a copy from the ActivityDefinition, made at the time of creation.

The sharing Approval Policy is set using a conceptMap

The ConceptMap http://ehealth.sundhed.dk/ConceptMap/activitydefinition-code-to-perform-sharing is used to determine if the Sharing Approval Policy should be set based on the ServiceRequests code: http://ehealth.sundhed.dk/vs/activitydefinition-code

...

The column “Activitydefinition-code-to-perform-sharing” is used to decide whether the Sharing Approval Policy should be set for the given activitydefinition code, by use of the ConceptMap.

Setting the ServiceRequest Measurement Regime

The measurement regime of a ServiceRequest expresses when the activity described in the ServiceRequest is supposed to take place. The measurement regime is defined in ServiceRequest.occurrence[x] by use of one of the alternatives:

• occurrenceDateTime - used when the activity should be performed at a specific point in time, that is date and time.

• occurrencePeriod - used when the activity should be performed once during a period. The period may be open, that is, without the period end being specified.

• occurrenceTiming - used when the activity should be performed in a recurring manner, for instance, each week or at specific days or times of day.

The initial measurement regime in ServiceRequest.occurrence[x] is a copy from the PlanDefinition/ActivityDefintion made at the time of creation (see https://ehealth-dk.atlassian.net/wiki/spaces/EDTW/pages/1661141027/Creating+Care+Plans#Applying-the-PlanDefinition) and typically, it contains no starting date/time.

...

Timing expression copied from PlanDefinition/ActivityDefinition created in KAM

If recurring timing expression is copied from PlanDefinition/ActivityDefinition created in KAM the following transformation is needed for the infrastructure to resolve the timing:

For periodUnit wk (weekly)

...

If PlanDefinition.action[].timingTiming.repeat.periodUnit is wk (Week), apart from ServiceRequest.occurrenceTiming.repeat.boundsPeriod.start being mandatory, the following changes are required for the expression to be resolvable by the infrastructure:

...

Example

Expression from PlanDefinition.action[].timingTiming.repeat created in KAM. (Intention from KAM: Every second Monday at 10 AM, for 2 months)

"repeat": {
  "frequency": 1,
  "period": 2,
  "periodUnit": "wk",
  "dayOfWeek": [ "mon" ],
  "timeOfDay": [ "10:00:00" ],
  "boundsDuration": {
    "unit": "mo",
    "value": "2"
  }
}

Must be transformed to:

"repeat": {
  "frequency": 1,
  "period": 2,
  "periodUnit": "wk",
  "boundsPeriod": {
    "start": "2023-09-04T10:00:00.000+02:00" <-- Starting from a Monday at 10 AM
    "end": "2023-11-04T10:00:00.000+02:00" <-- ending after 2 months
  }
}

...

"repeat": {
  "frequency": 1,
  "period": 2,
  "periodUnit": "wk",
  "dayOfWeek": [ "mon" ],
  "timeOfDay": [ "10:00:00" ],
  "boundsPeriod": {
    "start": "2023-09-01T08:00:00.000+02:00" <-- always required, can occur on any day of the week at any time of day
    "end": "2023-11-01T08:00:00.000+02:00" <-- ending after 2 months
  }
}

For periodUnit other than wk (weekly)

...

...

Expression from PlanDefinition.action[].timingTiming.repeat created in KAM. (Intention from KAM: Every third day at 10 AM, for 2 months)

"repeat": {
        "duration": 2,
        "durationUnit": "h",
        "frequency": 1,
        "period": 3,
        "periodUnit": "d",
        "timeOfDay": [ "10:00:00" ],
        "boundsDuration": {
        "unit": "mo",
        "value": "2"
        }
      }

Must be transformed to:

"repeat": {
        "duration": 2,
        "durationUnit": "h",
        "frequency": 1,
        "period": 3,
        "periodUnit": "d",
        "boundsPeriod": {
          "start": "2023-08-28T10:00:00.000+02:00" <-- Starting from a Monday at 10 AM
          "end": "2023-10-28T10:00:00.000+02:00" <-- ending after 2 months
        }
}

...

"repeat": {
       "duration": 2,
        "durationUnit": "h",
        "frequency": 1,
        "period": 3,
        "periodUnit": "d",
        "timeOfDay": [ "10:00:00" ],
        "boundsPeriod": {
          "start": "2023-08-28T06:00:00.000+02:00" <-- always required, can occur on any day of the week at any time of day
          "end": "2023-10-28T06:00:00.000+02:00" <-- ending after 2 months
        }
}

Managing offering ServiceRequest as extra activities

The extension includeAsExtra on ServiceRequest, is used to determine whether the ServiceRequest should be provided as an extra activity in the $get-patient-procedures result. The value for includeAsExtra is copied from the corresponding PlanDefinition.action during creation of the ServiceRequest ($apply operation), and the value can be updated on any individual ServiceRequest.

The value for includeAsExtra can be set through the TimingPicker. The default value for includeAsExtra is false when not scheduled or adhoc, and true when a schedule has been configured.

...

Maintaining ServiceRequest Status

Over the lifecycle of a ServiceRequest it’s , its status might change. Adjustment of ServiceRequest.status can be performed through ServiceRequest Update by:

...

{
  "resourceType": "ServiceRequest",
  "id": "2297",
  "meta": {
    "versionId": "1",
    "lastUpdated": "2023-05-16T07:50:59.790+00:00",
    "profile": [
      "http://ehealth.sundhed.dk/fhir/StructureDefinition/ehealth-servicerequest"
    ]
  },
  "extension": [
    {
      "url": "http://hl7.org/fhir/StructureDefinition/workflow-episodeOfCare",
      "valueReference": {
        "reference": "https://careplan.cit-careplan-2467.local/fhir/EpisodeOfCare/2296"
      }
    },
    {
      "url": "http://ehealth.sundhed.dk/fhir/StructureDefinition/ehealth-sharingPolicy",
      "valueCodeableConcept": {
        "coding": [
          {
            "system": "http://ehealth.sundhed.dk/cs/measurement-sharing-policies",
            "code": "noSharing"
          }
        ]
      }
    },
    {
      "url": "http://ehealth.sundhed.dk/fhir/StructureDefinition/ehealth-servicerequest-statusSchedule",
      "extension": [
        {
          "url": "status",
          "valueCode": "on-hold"
        },
        {
          "url": "scheduledTime",
          "valueDateTime": "2023-05-16T07:50:59+00:00"
        }
      ]
    },
    {
      "url": "http://ehealth.sundhed.dk/fhir/StructureDefinition/ehealth-servicerequest-statusSchedule",
      "extension": [
        {
          "url": "status",
          "valueCode": "revoked"
        },
        {
          "url": "scheduledTime",
          "valueDateTime": "2023-06-14T07:50:59+00:00"
        }
      ]
    }
  ],
  "instantiatesCanonical": [
    "https://plan.cit-careplan-2467.local/fhir/ActivityDefinition/94941"
  ],
  "status": "active",
  "intent": "filler-order",
  "code": {
    "coding": [
      {
        "system": "http://ehealth.sundhed.dk/cs/activitydefinition-code",
        "code": "445988008"
      }
    ],
    "text": "12254d24-58c3-480a-946f-ca72cdfa54d3"
  },
  "subject": {
    "reference": "https://patient.cit-careplan-2467.local/fhir/Patient/87825"
  }
}

{
  "resourceType": "ServiceRequest",
  "id": "2297",
  "meta": {
    "versionId": "2",
    "lastUpdated": "2023-05-16T07:51:00.889+00:00",
    "profile": [
      "http://ehealth.sundhed.dk/fhir/StructureDefinition/ehealth-servicerequest"
    ]
  },
  "extension": [
    {
      "url": "http://hl7.org/fhir/StructureDefinition/workflow-episodeOfCare",
      "valueReference": {
        "reference": "https://careplan.cit-careplan-2467.local/fhir/EpisodeOfCare/2296"
      }
    },
    {
      "url": "http://ehealth.sundhed.dk/fhir/StructureDefinition/ehealth-sharingPolicy",
      "valueCodeableConcept": {
        "coding": [
          {
            "system": "http://ehealth.sundhed.dk/cs/measurement-sharing-policies",
            "code": "noSharing"
          }
        ]
      }
    },
    {
      "url": "http://ehealth.sundhed.dk/fhir/StructureDefinition/ehealth-servicerequest-statusSchedule",
      "extension": [
        {
          "url": "status",
          "valueCode": "on-hold"
        },
        {
          "url": "scheduledTime",
          "valueDateTime": "2023-05-16T07:50:59+00:00"
        }
      ]
    },
    {
      "url": "http://ehealth.sundhed.dk/fhir/StructureDefinition/ehealth-servicerequest-statusSchedule",
      "extension": [
        {
          "url": "status",
          "valueCode": "revoked"
        },
        {
          "url": "scheduledTime",
          "valueDateTime": "2023-06-14T07:50:59+00:00"
        }
      ]
    }
  ],
  "instantiatesCanonical": [
    "https://plan.cit-careplan-2467.local/fhir/ActivityDefinition/94941"
  ],
  "status": "active",
  "intent": "filler-order",
  "code": {
    "coding": [
      {
        "system": "http://ehealth.sundhed.dk/cs/activitydefinition-code",
        "code": "445988008"
      }
    ],
    "text": "12254d24-58c3-480a-946f-ca72cdfa54d3"
  },
  "subject": {
    "reference": "https://patient.cit-careplan-2467.local/fhir/Patient/87825"
  }
}

...

• revoked when not to be performed for the particular Patient

• on-hold when depending on one or more submissions on another activity in the plan - this is the initial state when this is the case.

• active when any required device has been provided to the citizen and the measurement regime has been adjusted to contain the starting date/time

• completed when fully or adequately performed

...

...

Controlling the Trigger Enablement

In a PlanDefinition, action triggers can be added for the comprised activities as described in https://ehealth-dk.atlassian.net/wiki/spaces/EDTW/pages/

...

1696137281/

...

Managing+

...

Controlling the Trigger Enablement

In a PlanDefinition, action triggers can be added for the comprised activities as described in Telemedicine+Packages#Setting-up-one-or-more-actions-as-trigger-for-an-action-in-PlanDefinition. When the PlanDefinition is $apply'ed to a CarePlan, it is reflected in each of the resulting ServiceRequest whether it is depending on trigger conditions to be met, see https://ehealth-dk.atlassian.net/wiki/spaces/EDTW/pages/16961372811661141027/ManagingCreating+TelemedicineCare+Packages#SettingPlans#Action-Triggers-upand-one-or-more-actions-as-trigger-for-an-action-in-PlanDefinition. When the PlanDefinition is $apply'ed to a CarePlan, it is reflected in each of the resulting ServiceRequest whether it is depending on trigger conditions to be met, see Trigger-Conditions. It is reflected in the ServiceRequest element triggerEnablement whether it is dependent or not. By default (at the time of $apply):

• ServiceRequest.triggerEnablement is set to NO_TRIGGER when the ServiceRequest is not depending on trigger conditions. It may trigger other ServiceRequest, though.

• ServiceRequest.triggerEnablement is set to TRIGGER_ENABLED if it depends on trigger conditions. The ServiceRequest.status is set to on-hold.

When trigger conditions are fulfilled, a triggerEnablement of TRIGGER_ENABLED changes to TRIGGER_DONE automatically as described in https://ehealth-dk.atlassian.net/wiki/spaces/EDTW/pages/1661141027538935313/CreatingBehind+Care+Plans#Actionthe+Scenes#Automated-Processing-of-Action-Triggers-and-Trigger-Conditions. At this point, even if the trigger conditions are fulfilled again, there will be no change. It is reflected in the ServiceRequest element triggerEnablement whether it is dependent on not. By default (at time of $apply):

• ServiceRequest.triggerEnablement is set to NO_TRIGGER when the ServiceRequest is not depending on trigger conditions. It may trigger other ServiceRequest, though.

• ServiceRequest.triggerEnablement is set to TRIGGER_ENABLED if it is depending on trigger conditions. The ServiceRequest.status is set to on-hold.

When trigger conditions are fulfilled, a triggerEnablement of TRIGGER_ENABLED changes to TRIGGER_DONE automatically as described in https://ehealth-dk.atlassian.net/wiki/spaces/EDTW/pages/538935313/Behind+the+Scenes#Automated-Processing-of-Action-Triggers-and-Trigger-Conditions. At this point, even if the trigger conditions are fulfilled again, there will be no change.

It is possible to control, per ServiceRequest, whether it shall react to action triggers. The following manual changes of triggerEnablement are possible by ServiceRequest Update:

• TRIGGER_ENABLED change to TRIGGER_DISABLED - to disable triggering of the depending ServiceRequest, for instance, if the citizen is on vacation.

• TRIGGER_DISABLED change to TRIGGER_ENABLED - to re-enable triggering of a depending ServiceRequest, for instance, if the citizen has returned from vacation.

• TRIGGER_DONE change to TRIGGER_ENABLED - to re-enable triggering of a depending ServiceRequest even though it has been triggered already.

When re-enabling, it should be considered what is the appropriate status of the ServiceRequest. For a triggering behavior such as activation, the ServiceRequest status should manually be set to on-hold.

...

It is possible to control, per ServiceRequest, whether it shall react to action triggers. The following manual changes of triggerEnablement are possible by ServiceRequest Update:

• TRIGGER_ENABLED change to TRIGGER_DISABLED - to disable triggering of the depending ServiceRequest, for instance, if the citizen is on vacation.

• TRIGGER_DISABLED change to TRIGGER_ENABLED - to re-enable triggering of a depending ServiceRequest, for instance, if the citizen has returned from vacation.

• TRIGGER_DONE change to TRIGGER_ENABLED - to re-enable triggering of a depending ServiceRequest even though it has been triggered already.

When re-enabling, it should be considered what is the appropriate status of the ServiceRequest. For a triggering behaviour such as activation, the ServiceRequest status should manually be set to on-hold.

Setting the Document Sharing Approval Policy

The document registering approval policy of a ServiceRequest set in ServiceRequest.ehealth-sharingApprovalPolicy expresses whether submitted measurement data (for instance measurements or questionnaire responses) for the activity shall be automatically approved for document sharing or whether manual approval is required.

When set, the value of ServiceRequest.ehealth-sharingApprovalPolicy controls how approval for document registering is handled per submitted measurement:

• manual, a clinician must manually approve each submitted measurement for document registering

• automatic, the eHealth Infrastructure automatically creates the approval for document registering

If not set, the default behaviour is manual.